 |
Greatly reduces the number
of picture dropouts & breakups when Transmitter or Receiver is in motion. |
|
Virtually no loss of picture
quality due to cars or people moving between the Transmitter and Receiver. |
|
TrueD™ diversity allows you
to walk or drive around with one of our CVT series Transmitters and enjoy
almost dropout free reception within the Transmitter's normal range. |
|
The five section signal strength
indicators are a real help in evaluating location, antenna position and
range. The first three lights are green showing excellent to moderate signal
strength. The next light is yellow, warning of a weak signal. The red light
means that the signal is probably not usable. |
|
The red LED light also serves
as a low battery warning by blinking when the battery falls to 10.5 volts. |
|
The Receiver performs a self-check
when first turned on. |
|
When another channel is selected,
a green light will blink to let you know that the internal phase lock circuitry
is functioning properly and will stop blinking once it has achieved frequency
lock. |
|
Two parallel power & audio
connectors are provided -- a 4 terminal barrier strip & a 4 pin mini-DIN
– use whichever is most convenient for your application. |
|
The Receiver may be attached
to a wall or other surface using a slide-on bracket. It may be placed on
a desk or mounted to an irregular surface with the hardware provided. |
|
10 User selectable channels;
up to 3 may be in operation in the same area. |
|
Changeable color coded plastic
side panels may be inserted to distinguish operating frequency used between
multiple Transmitter and Receiver sets. |
|
No license required: US/ Canada
approvals under FCC part 15 & IC RSS-210 (Canada). |
|
Works from a 12 or 24 Volt battery
or AC Adaptor. |
|
An Audio level control is available
to precisely match the CVR-1500’s audio output to your equipment. |
