Professional Video & Motion Picture Wireless Video-Audio / Time Code Systems

F E A T U R E D   P R O D U C T S

	CVT-M Sub-Miniature Video Transmitter A truly tiny size for maximum flexibility in placement & concealment— may be body worn, put in helmet, etc. Extremely rugged and lightweight Aluminum enclosure, all surface mounted parts for maximum reliability. Two switch selectable channels in 902-928 MHz band, US / Canadian approved power levels -- no license required. Higher powered export model available between 900 and 1300 MHz. Works from a 9 Volt Alkaline battery for up to 8 hours (not including camera). FM Video for highest quality picture and most resistance to interference. Wide power supply range from 7.6 to 14 VDC or AC Adaptor  Color coded side markers to distinguish between multiple Transmitter and Receiver sets. Crystal referenced, synthesized PLL design for best frequency stability and reliability over temperature.

CVT-500 Wireless Video Transmitter Built-in high efficiency antenna for good range & small package size Rugged ABS plastic case. Lightweight 4.6 oz. (129g). Our lowest cost 10-channel transmitter. Easily held in place with tape, Velcro®. Works on batteries from 12 to 24 VDC or regulated 12 VDC power supply. For hidden camera use, a CVT-500 Transmitter, a mini-camera and power pack (12 Volts) easily fits in an attaché case, sports bag,  book, etc. Perfect for video only applications when no audio or internal time/date or time code generator is required. On / Off switch turns on indicator light to check battery (light blinks red for low battery) and transmitter check function (light blinks green if no frequency lock). 10 User selectable channels; up to 3 may be in operation in the same area. Use with our CVR-1500 Diversity Receiver for fewer picture dropouts in portable/mobile applications. US / Canadian approvals under FCC part 15 & IC RSS-210 (Canada) or higher power for export / licensed versions.

CVT-1400 Wireless Video-Audio Transmitter Rugged and light weight Aluminum case for maximum protection. High quality locking connector for power, audio and Time Code. On / Off switch turns on indicator light to check battery (light blinks red for low battery) and transmitter function (light blinks green if no frequency lock). 10 User selectable channels; up to 3 may be in operation in the same area. Use with our CVR-1500 Diversity Receiver for maximum reliability in portable applications. US / Canadian approvals under FCC part 15 & IC RSS-210 (Canada) or higher power for export versions. Works from a 12 or 24 Volt battery or AC adapter. Great audio quality with both Microphone and Line level inputs available. Microphone input also powers Lavalier and other Electret microphones. Built in peak audio limiter to prevent overload. Convenient mounting bracket optional. Removable color-coded plastic side panels to distinguish operating frequency used between multiple transmitter and receiver sets Optional mounting brackets.

CVR-200 Wireless Video Receiver A truly small size for maximum flexibility and convenience. Extremely rugged and lightweight Aluminum enclosure, electronics use latest surface mounted technology for maximum reliability. Two switch selectable channels in 902-928 MHz band, US / Canadian -- no license required. Works from a 9 Volt Alkaline battery for up to 6 hours. Wide power supply range from 7.6 to 14 VDC (to 30 VDC optional), or AC Adapter. FM Video for highest quality picture and most resistance to interference. Color coded side markers to distinguish between multiple Transmitter and Receiver sets. Crystal referenced, synthesized PLL design for best frequency stability and reliability over temperature.

CVR-1000 Wireless Video-Audio Receiver The five section signal strength indicators are a real help in evaluating location, antenna position and range. The first three lights are green showing excellent to moderate signal strength. The next light is yellow, warning of a weak signal. The red light means that the signal is probably not usable. The red LED light also serves as a low battery warning by blinking when the battery falls to 10.5 volts. Receiver performs a self check when first turned on. When another channel is selected, a green light will blink to let you know that the internal phase lock circuitry is functioning properly and will stop blinking once it has achieved frequency lock.  Two parallel power & audio connectors are provided -- a 4 terminal barrier strip & a 4 pin mini-DIN -- use whichever is most convenient for your application. The Receiver may be attached to a wall using a slide-on bracket, placed on a desk or mounted to an irregular surface with the optional brackets. 10 User selectable channels; up to 3 may be in operation in the same area. Changeable color coded plastic side panels may be inserted to distinguish operating frequency used between multiple Transmitter and Receiver sets. No license required: US/ Canada approvals under FCC part 15 & IC RSS-210 (Canada). Works from a 12 or 24 Volt battery or AC Adaptor. An Audio level control is available to precisely match the CVR-1000’s audio output to your equipment Optional mounting brackets.

CVR-1500 Wireless Video-Audio Triple Diversity Receiver Greatly reduces the number of picture dropouts & breakups when Transmitter or Receiver is in motion. Virtually no loss of picture quality due to cars or people moving between the Transmitter and Receiver. TrueD™ diversity allows you to walk or drive around with one of our CVT series Transmitters and enjoy almost dropout free reception within the Transmitter's normal range. The five section signal strength indicators are a real help in evaluating location, antenna position and range. The first three lights are green showing excellent to moderate signal strength. The next light is yellow, warning of a weak signal. The red light means that the signal is probably not usable. The red LED light also serves as a low battery warning by blinking when the battery falls to 10.5 volts. The Receiver performs a self-check when first turned on. When another channel is selected, a green light will blink to let you know that the internal phase lock circuitry is functioning properly and will stop blinking once it has achieved frequency lock. Two parallel power & audio connectors are provided -- a 4 terminal barrier strip & a 4 pin mini-DIN – use whichever is most convenient for your application. The Receiver may be attached to a wall or other surface using a slide-on bracket. It may be placed on a desk or mounted to an irregular surface with the hardware provided. 10 User selectable channels; up to 3 may be in operation in the same area. Changeable color coded plastic side panels may be inserted to distinguish operating frequency used between multiple Transmitter and Receiver sets. No license required: US / Canada approvals under FCC part 15 & IC RSS-210 (Canada). Works from a 12 or 24 Volt battery or AC Adaptor. An Audio level control is available to precisely match the CVR-1500’s audio output to your equipment. Optional mounting brackets.

© 2000-2002 Coherent Communications, Inc. All Rights Reserved.