|
|
 |
 |
 |
|
|
 |
Wireless Data Modem
& Pan Tilt & Zoom Link
Model PTZ-3B
|
|
|
|
 |
|
 |
|
 
|
Use
for Wireless Transmission of RS-232, 422 or
485
Data, Remote Access Control or Camera P/T/Z
from
TWO MILES (3.2 km) away WITHOUT WIRES
|
|
|
|
|
|
| P
T Z - 3 BL F e a t u r e s |
|
|
 |
BIG SAVINGS if you use leased
Telco lines to send data—let the PTZ-3BL do it for free! |
|
|
2.4 GHz Band requires NO license
for operation in the US or Canada |
|
|
This Smart RF Modem will transmit
& receive data from or to a computer, a camera, access control
equipment, sensors, can even be used as a wireless on/off switch, etc. |
|
|
With simple patch antennas and
line of sight, your remote location may be 2 or more miles (3.2 km)
to your home base. Range may be extended to 20 or more
miles (32 km) with high gain antennas providing line of sight
is maintained |
|
|
PTZ-3BL works with most manufacturers’
camera controllers that use RS-422 or RS-485 serial data to command
their Domes & Cameras (for RS-232 only, use our PTZ-3AL) |
|
|
Up to 234 links will work together
for maximum flexibility with multiple systems (requires a computer
for control) |
|
|
Operates Point to Point or Point
to Multipoint (when attached to a PC) |
|
|
Requires only 7 to 9 Volts DC
for field use or power from a 9 V wall adapter (7.5 to 16 VDC) |
|
|
The PTZ-3BL uses the latest Spread
Spectrum, Frequency Hopping technology, temperature controlled crystal
oscillators and surface mount components for top reliability |
|
|
|
| The PTZ-3BL may be used as
a general-purpose RF data modem as well as to transmit control information
for cameras & access equipment such as gates & doors. Also
designed for SCADA, telemetry and sensor data transmission. Data
rate is 600 to 9600 bps synchronous, to 19200 bps asynchronous. The
8 bit data is buffered and contains extensive error correction capabilities. |
|
| P
Z T - 3 BL S p e c i f i c a t i o n s |
|
|
| Radio system: |
2.4 to 2.483 GHz Frequency
Hopping, Spread Spectrum transmission, up to 234 channels available |
| RF power out: |
10 to 600 milliwatts, power
is automatically adjusted to provide best signal with lowest current |
| Modem features: |
Forward error correction,
hardware flow control, buffer delay of data, Windows 98 / NT configuration
from PC serial port. Full duplex operation: 600 to 9600 bps,
half duplex: 19200 bps. |
| Power requirements: |
9 VDC nominal at 800 mA
maximum. 7 V minimum |
| Agency approvals: |
FCC approved No license
required for operation. |
| Size & weight: |
5.5 L x 4 W x 1.5 H in (14
x 10 x 4 cm) / 1 lb. (450g) |
| Environmental: |
-4°F to +140°F (-20°C
to +60°C) 5% to 95% Humidity (Non-condensing) |
|
|
|
Order the PTZ-3B for
RS-422 & 485 and RS-232 applications.
For RS-232 only, order
Model PTZ-3AL . |
|
| Preliminary specifications
subject to change without notice. |
|
| MADE IN THE
USA |
|
|
